 Reshafting TaylorMade R9 Driver |
Posted by Robert on 2009-18-11 19:09
Hi
Can I reshaft TaylorMade R9 driver with any shaft I want?
Or Does it require a special shaft just like Callaway I-Mix?
-Robert( Read More... | 1 comments )
| shaft vibrations |
Posted by wally on 2009-17-11 06:07
Has anyone ever put some of that spray in foam in a shaft to dampen the vibration I'm thinking it would help along the lines of sensi-core help with the ...( Read More... | 2 comments )
| shortening of 2009 Taylormade Burner shaft |
Posted by Russ on 2009-12-11 08:18
I am considering shortening the 46 25 inch length of my 2009 Burner (reg flex) to 45 inches by cutting the butt end by 1 25 inches I would add ...( Read More... | 4 comments )
| Shaft for a 43.5" driver |
Posted by Ronald on 2009-16-11 04:48
Hi
What shaft weight do I need to make a 43 5" driver with a D0 swing weight?
The head is weight around 200-202 gram ...( Read More... | 0 comments )
| Replacement for Fujikura High Launch 65 |
Posted by Steve on 2009-11-11 18:17
I'm looking for a Fujikura High Luanch 65 shaft (stiff/Mid/68g/3 5 tq Apparently Fujikura no longer makes these Any suggestions on an appropriate replacement shaft will be appreciated( Read More... | 0 comments )
| UST V-2 High Launch |
Posted by Ed Holcomb on 2009-10-11 18:59
Looking for the above shaft in a 0350 tip diamater to replace in a Ping G10 driver Original shaft was broken i need to replace I know I can shim ...( Read More... | 0 comments )
| Replacement shaft for Titleist 981 DCI |
Posted by dblbogey on 2009-09-11 15:26
I need a replacement shaft for a Titleist 981 DCI 8 iron It's a graphite shaft it says Titleist "Select" "Custom Graphite Technology" on the shaft S flex I don't ...( Read More... | 0 comments )
| Tip trim lengths SE VSE/VSE60 shafts R to S flex |
Posted by clr944 on 2009-09-11 08:51
Tipping Regular to Stiff flex for Snake Eyes VSE Woods and FW shafts
What is the recommended tipping length (1 in or so) to get an R flex ...( Read More... | 0 comments )
| ProjectX Wood shafts - info? |
Posted by Rod Spierings on 2009-06-11 08:11
GS
Could you be so kind as to post some more specs (or insights) of this new ProjectX wood shaft?
It seems like an awful lot of money ...( Read More... | 1 comments )
| Re-shafting of Mizuno MP 33 irons. |
Posted by Bill Hunniford on 2009-05-11 16:14
What Grafite shafts should I use to re-shaft these irons? Parallel tip or tapered tip?( Read More... | 0 comments )
| Tips on reshafting callaway X-tour irons |
Posted by Ron on 2009-05-11 03:43
Hi
any tips on pulling out old shaft from Callaway X-Tour irons (it's NS PRO) ?
I plan to install a new True temper GS75 on ...( Read More... | 0 comments )
| rust on face of irons |
Posted by Dennis McGowan on 2009-31-10 23:24
I built a set of 600XC forged irons I am having a problem with the face showing signs of rust these are less than a year old I do not ...( Read More... | 2 comments )
| Callaway FT I Driver Tip Size |
Posted by Mark on 2009-29-10 05:46
I need to reshaft my callaway ft i driver head Anybody know the tip diameter? Thanks( Read More... | 2 comments )
| Proforce XT or Series 600 Driver Shaft (R flex) |
Posted by BrentY on 2009-27-10 12:50
Anyone have a new or pull of the Snake Eyes Proforce XT or Series 600 driver shaft in regular flex they can part with?
Thanks
BrentY( Read More... | 2 comments )
| tip sizes |
Posted by Vern on 2009-27-10 20:36
I have some iron shafts with a tip diameter of 0 355 Will they work in a head with 0 37 hosel?( Read More... | 2 comments )
| Parallel Tip Shafts |
Posted by Duncan on 2009-28-10 10:17
Please can someone help?
I am looking for a set of over the hosel shaft's with a 395 parallel tip so that I can re-shaft a really old set ...( Read More... | 0 comments )
| Shaft for 600B |
Posted by Cesar on 2009-13-10 08:38
Hi I have played the 600B iron set for de last 6 years with DG R300 steel shafts Normally I reach 175 to 180 yards with my 5 iron but ...( Read More... | 2 comments )
| shaft choice |
Posted by mick on 2009-14-10 04:58
I have a set of project x flighted shafts 5 5 that were are too heavy for the heads I have What alternatives could I use with a lighter weight ...( Read More... | 1 comments )
| shaft alignment |
Posted by mike on 2009-08-10 19:45
before beginning to play golf about 3 years ago i fished and made fishing rods i may try making a driver for myself from making fish rods i remember that ...( Read More... | 7 comments )
| tipping shaft to make stiffer |
Posted by Gary on 2009-12-10 07:59
I have a GS 1911W HiCor GS50 R 80-90 mph shaft (no stiff available) that I am putting in a 11 5 deg GS G3440 HiCor driver I want to ...( Read More... | 2 comments )
