 Cleveland HiBore XL driver shaft problem |
Posted by Rich Bell on 2009-20-11 00:42
I need to reshaft this club the old graphite shaft has been broken and twisted off at the ferrule leaving shreds from there down The hosel is only 1/2" deep ...( Read More... | 0 comments )
| Reshafting Nike SQ driver |
Posted by Rodney on 2009-18-11 18:18
Having difficulty extracting a graphite shaft from Nike SQ driver Used a hot rod and shaft extractor plenty of heat down the hosel but the head doesn't budge under plenty ...( Read More... | 1 comments )
| Removing a shaft extender for a graphite shaft |
Posted by Mike on 2009-13-11 21:37
I have a graphite shaft with an extender that was put in crooked I'd like to pull it out and put in a new extender
Is there a ...( Read More... | 1 comments )
| Callaway decals coming off? |
Posted by Jerry on 2009-11-11 07:45
Where can I find matching paint for brand name driver refinishing like TaylorMade Callaway Titleist? I think it's important the paint matches the original dont you? Also what about the ...( Read More... | 2 comments )
| resurfacing wood fairway woods |
Posted by guy potvin on 2009-30-10 14:38
i have a few nicks on a old ping wood and i'd like to fix them( Read More... | 1 comments )
| Hosel Cleaner |
Posted by Michael Truan on 2009-12-10 23:32
Does any one still make the hosel cleaner that was a slotted steel shank that you could use with 1" sandpaper to clean a hosel It was Stock # 8321 ...( Read More... | 6 comments )
| Repair Tags |
Posted by Michael Truan on 2009-25-10 00:44
It is my understanding that Golfsmith will no longer carry repair tags Does anyone have a source for golf club specific repair tags Uline has general repair tags( Read More... | 0 comments )
| Refinishing Hogan Apex Plus Irons |
Posted by Brad on 2009-22-10 20:44
I have a set of Hogan Apex Plus irons that are getting somewhere as they are a few years old I would like to refinish them I was thinking of ...( Read More... | 0 comments )
| reshafting R9 |
Posted by Tom Murray on 2009-16-10 11:40
I am getting ready to attempt my first reshaft of a Taylor R9 Any suggestions/recommendations for removing the tip fitting or just for reshafting it in general would be appreciated ...( Read More... | 1 comments )
| mp-33 ferrule |
Posted by Rich on 2009-18-10 19:07
Does anybody know which ferrule to use for Mizuno MP-33? I put a caliper on the stock ferrule and it indicates about 13mm
Thanks Rich( Read More... | 0 comments )
| refinish metal club heads |
Posted by RIck on 2007-03-09 19:57
I need advice on how to and what kind of paint and clear coat is used to refinish club head thanks( Read More... | 22 comments )
| PING Putter Head Removal |
Posted by Terry on 2009-10-06 16:55
Does anyone know how to remove a PING putter head that has a bearing at the bottom of the hosel?????
Heating and a puller doesn't work and I don't ...( Read More... | 3 comments )
| shaft replacement |
Posted by Roger Mayhew on 2009-12-10 19:13
I have a Macgregor DX titanimu shaft by Aldila stiff flex and low balance point The shaft has an over size butt It is in a MacGregor DX fairway 5 ...( Read More... | 0 comments )
| Mizuna shaft |
Posted by James Michael Mattila on 2009-25-09 10:32
A friend broke his Mizuna MP-001 8 5* driver shaft Would anybody know who manufactured the shaft and some of the spec's for it I would like to replace the ...( Read More... | 1 comments )
| Shafts pulling by Hot Rod |
Posted by Norm Foster on 2009-20-09 11:31
Bill you taught us how to pull shafts from clubs that had a ferrule insert using a hot rod which removerd the shaft without loosening the ferrule insert like the ...( Read More... | 0 comments )
| Ping s57 iron head removal |
Posted by James on 2009-31-08 23:25
Hi I have some Ping S57 irons that I would like to re-shaft I have successfully re shafted other Ping Irons but I am scared to apply a gas heat ...( Read More... | 6 comments )
| Solvent |
Posted by Bobby on 2009-13-09 12:44
I currently use GS grip solvent on my repairs however was told to try paint thinner /mineral sprits would work just as well Any one have any experiences with the ...( Read More... | 3 comments )
| club bending |
Posted by jack on 2009-12-09 15:35
I've been trying to add 1 5 deg loft to a Viper xt 3i & Python xl 4i I've got the GS Pro L&L & have tried the reg & ...( Read More... | 0 comments )
| Refinishing metal woods |
Posted by Ken on 2009-12-09 02:09
Could you also send me a copy of refinishing metal woods
Thanks!( Read More... | 0 comments )
| Titleist AP2 Ferrule |
Posted by Jim on 2009-10-09 12:39
What is the replacement ferrule for the AP2 iron head It is 355 tapered but it is insert ferrule Does GS have this insert tt ferrule?
Jim( Read More... | 1 comments )
